The four-day Xiamen Stone Fair 2024 has come to an end. As a grand event in the stone industry, each exhibition attracts the attention of many people from both inside and outside the industry. This year's stone exhibition once again showcases its unique charm and influence, with a large scale and over 1300 global exhibitors and over 100000 visitors.
Sagwell brought multiple pre-alloyed powders and iron powders to the exhibition, and during the four-day period, there was a continuous flow of people. Among them, customers were most interested in material for free sintering and backing powder of laser welding, which can bring cost reduction needs to customers.
Sagwell ultrafine iron powder series
1. Backing powder of laser welding (TUA-1)
The iron powder can be 100% used as backing powder of lase welding products, and the tooth strength value is 2-3 times higher of the EN standard.
2. For free sintering (TUF)
During cold press 250-350 MPa, relative green density reaches 60-70%, during free sintering 930-950 ℃, relative density can reach 90%.
3. High holding force to diamonds (EHA-T)
With fine particle size (average particle size of 2000 mesh), high purity, high activity, and high strength.
Sagwell ultrafine pre-alloyed powder series
1. Specially used for hard stone processing (SFN-10)Specially suitable for processing high hardness, medium to low abrasiveness stone (Indian red), continuous cutting, sharp and stable.
2. Application of wire saw and gang saw (FeCoNiCu series alloyed powder)With high hardness, high strength, and ultra-high comprehensive performance.
3. Glass and marble processing (Copper based alloyed powder)Has good self sharpening ability, making easier protrusion during cutting and grinding processes.
4. Backing powder of laser welding (SFN-01)750℃ can complete densification sintering, with a strength of up to 1500 MPa and obvious toughness characteristics.
To know more about our products, please feel free to contact us for detailed information. Email: [email protected]
